Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2061 (CELLULAR SYSTEMS, ENTERTAINMENT SYSTEMS & NAVIGATION SYSTEMS)DIAGNOSTIC INFORMATION AND PROCEDURESDTC B1289DIAGNOSTIC FAULT INFORMATION
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Diagnostic Fault Information
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Diagnostic Fault Information
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Circuit | Short to Ground | Open/High Resistance | Short to Voltage | Signal Performance |
|---|---|---|---|---|
| DVD Display B+ | 1 | 1 | 1 | - |
| Radio ON Signal | 1 | 1 | 1 | - |
| Video Display Brightness Control | B1289 02 | B1289 04 | B1289 01 | - |
| Video Display Mode Control | B1288 02 | B1288 04 | B1288 01 | - |
| Video High Signal | 1 | 1 | 1 | - |
| Video Low Signal | 1 | 1 | 1 | - |
| DVD Display Ground | - | 1 | - | - |
| 1. Video Entertainment System Inoperative. | ||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.