Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2060 (LIGHTING SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESDIAGNOSTIC CODE INDEX
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Diagnostic Code Index
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Diagnostic Code Index
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| DTC B1395 | B1395 03: Device Voltage Reference Output 1 Circuit Voltage Below Threshold B1395 07: Device Voltage Reference Output 1 Circuit Voltage Above Threshold |
| DTC B2530 | B2530 00: Front Fog Lamp Control Circuit |
| DTC B2545 | B2545 00: Backup Lamps Circuit |
| DTC B2555 | B2555 01: Passenger Compartment Lamp Control Circuit Short to Battery B2555 02: Passenger Compartment Lamp Control Circuit Short to Ground |
| DTC B2575 | 2575 00: Headlamp Low Beam Control Circuit |
| DTC B257A | B257A 00: Headlamp Switch Input Signal Mismatch |
| DTC B2580 | B2580 00: Headlamp High Beam Control Circuit |
| DTC B2585 | B2585 00: Park Lamp Control Circuit |
| DTC B2600 | B2600 00: Daytime Running Lamp Control Circuit |
| DTC B2610 | B2610 00: Passenger Compartment Dimming 1 Circuit |
| DTC B2615 | B2615 00: Passenger Compartment Dimming 2 Circuit |
| DTC B2625 | B2625 00: Display Dimming Pulse Width Modulation (PWM) Output Circuit |
| DTC B2645 | B2645 03: Ambient Light Sensor Circuit Voltage Below Threshold B2645 07: Ambient Light Sensor Circuit Voltage Above Threshold |
| DTC B2652 | B2652 00: Passenger Compartment Dimming 3 |
| DTC B3445 | B3445 00: Stop Lamp Circuit |
| DTC B3600 | B3600 03: Passenger Compartment Dimming Request Signal Voltage Below Threshold B3600 07: Passenger Compartment Dimming Request Signal Voltage Above Threshold |
| DTC B3884 | B3884 00: Center High Mounted Stop Lamp (CHMSL) Circuit |
| DTC C0277, C0297, or C0890 | C0277 06: Brake Pedal Position Sensor Circuit Short to Ground or Open C0277 07: Brake Pedal Position Sensor Circuit Voltage Above Threshold C0277 09: Brake Pedal Position Sensor Circuit Rate of Change Above Threshold C0277 4B: Brake Pedal Position Sensor Calibration Not Learned C0297 00: Brake Applied Output Circuit C0890 03: Device Voltage Reference Output 3 Circuit Voltage Below Threshold C0890 07: Device Voltage Reference Output 3 Circuit Voltage Above Threshold |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.