Ball Check Valve Locations

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Ball Check Valve Locations
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ball Check Valve Locations
GM1760309Courtesy of GENERAL MOTORS CORP.
I.D. Input Oil Input Oil Output Oil
1 Drive 1-6 DRV B 26/1234 CL Feed
2 Solenoid 1 Reverse CSV2 Enable
3 Solenoid 2 456 CSV3 Enable
4 PS4 456 CSV2 Latch
5 Drive 1-6 35 Rev FD 35 Rev Supply
6 2-6/1234 - 1234 Clutch Feed
7 35R Supply - 35R Clutch Feed
8 Low/Rev Supply - Low/Rev Clutch Feed
9 456 Clutch Supply - 456 Clutch Feed
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.