Inflatable Restraint Sensing and Diagnostic Module (SDM)

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Inflatable Restraint Sensing and Diagnostic Module (SDM)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Sensing and Diagnostic Module (SDM) - Connector End View
GM1468532Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Sensing and Diagnostic Module (SDM)

Pin Wire Circuit Function
1 0.5 BK/WH 1751 Ground
2 0.35 D-GN 5060 Low Speed GMLAN Serial Data
3 0.35 D-GN 5060 Low Speed GMLAN Serial Data
4 0.5 PK 3022 Steering Wheel Module - Stage 2 - Low Control (Light Duty)
5 0.5 WH 3023 Steering Wheel Module - Stage 2 - High Control (Light Duty)
6 0.5 GY 3027 Instrument Panel Module - Stage 2 - High Control (Light Duty with AK5)
7 0.5 PU 3026 Instrument Panel Module - Stage 2 - Low Control (Light Duty with AK5)
8 0.5 BN 3020 Steering Wheel Module - Stage 1 - Low Control
9 0.5 TN 3021 Steering Wheel Module - Stage 1 - High Control
10 0.5 YE 3025 Instrument Panel Module - Stage 1 - High Control
11 0.5 OG 3024 Instrument Panel Module - Stage 1 - Low Control
12 0.5 PK 5020 Roof Rail Module - Left - Low Control (ASF)
13 0.5 PU/WH 5019 Roof Rail Module - Left - High Control (ASF)
14 0.5 YE/BK 5021 Roof Rail Module - Right - High Control (ASF)
15 0.5 WH/BK 5022 Roof Rail Module - Right - Low Control (ASF)
16-21 - - Not Used
22 0.5 L-BU 7015 Roof Rail Module - Right Rear High Control (Passenger with ASF)
23 0.5 TN/BK 7016 Roof Rail Module - Right Rear Low Control (Passenger with ASF)
24 0.5 OG/BK 2119 Seat Belt Pretensioner - Left - Low Control (Light Duty)
25 0.5 TN/WH 2118 Seat Belt Pretensioner - Left - High Control (Light Duty)
26 0.5 L-GN 2116 Seat Belt Pretensioner - Right - High Control (Light Duty)
27 0.5 OG 2117 Seat Belt Pretensioner - Right - Low Control (Light Duty)
28 0.5 PK 5057 Low Reference
29 0.5 L-GN 5055 Seat Position Sensor - Left - Signal (Light Duty)
30 0.5 L-BU 5056 Seat Position Sensor - Right - Signal (Light Duty)
31 0.5 RD/WH 3440 Battery Positive Voltage
32 0.35 PK 1139 Ignition Voltage
33 0.5 PK 353 Instrument Panel Module Suppression Indicator Control (C99)
34 0.5 TN/PK 371 Instrument Panel Module Disable Switch - Signal (C99)
35 - - Not Used
36 0.5 D-BU/WH 6619 Low Reference
37 - - Not Used
38 0.5 BN/WH 6618 Discriminating Sensor - Signal
39 - - Not Used
40 0.5 PU/WH 6628 Low Reference (ASF)
41 0.5 WH/BK 6629 Low Reference (ASF)
42 0.5 WH 2132 Left Front Side Impact Sensing Module Signal (ASF)
43 0.5 D-GN 2134 Right Front Side Impact Sensing Module Signal (ASF)
44 0.5 L-BU 6622 Left Rear Side Impact Sensing Module Signal (Passenger with ASF)
45 0.5 L-BU/WH 6626 Right Rear Side Impact Sensing Module Signal (Passenger with ASF with E24/YA2)
46 0.5 L-GN/BK 6623 Low Reference (Passenger with ASF)
47 0.5 PK/BK 6627 Low Reference (Passenger with ASF with E24/YA2)
48-57 - - Not Used
58 0.5 YE/BK 5229 Rollover Sensor High Signal (ASF)
59 0.5 TN/WH 238 Seat Belt Switch - Left
60 0.5 OG 1362 Seat Belt Switch - Right - Signal (Light Duty)
Connector Part Information 
  • OEM: 13549639
  • Service: See Catalog
  • Description: 60-Way F 0.64 GET Series Sealed (YE)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.