SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1860 (WIRING SYSTEMS AND POWER MANAGEMENT - ELECTRICAL CENTER IDENTIFICATION, COMPONENT CONNECTOR & SPLICE PACK CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSINFLATABLE RESTRAINT I/P MODULE (LIGHT DUTY)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6

Inflatable Restraint I/P Module (Light Duty)

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Inflatable Restraint I/P Module (Light Duty)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint I/P Module (Light Duty) - Connector End View
GM684931Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint I/P Module (Light Duty)

Pin Wire Circuit Function
A1 0.5 YE 3025 Instrument Panel Module - Stage 1 - High Control
A2 0.5 OG 3024 Instrument Panel Module - Stage 1 - Low Control
B1 0.5 GY 3027 Instrument Panel Module - Stage 2 - High Control
B2 0.5 PU 3026 Instrument Panel Module - Stage 2 - Low Control
Connector Part Information 
  • OEM: 15336476
  • Service: 15336476
  • Description: 4-Way M Metri-Pack 280 Series (YE)
Terminal Part Information 
  • Terminal/Tray: Service with Pigtail
  • Core/Insulation Crimp: N/A
  • Release Tool/Test Probe: 12094430/J-35616-5 (PU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.