Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1800 (ENGINE CONTROLS AND FUEL - 3.6L - DTC P0008 TO DTC P0193)DTC P0117 OR P0118TYPICAL SCAN TOOL DATA
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Typical Scan Tool Data
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Typical Scan Tool Data
WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
ECT Sensor
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine operating in Closed Loop. Parameter Normal Range: -39 to 142°C (-38 to 288°F) Varies with coolant temperature. |
|||
| ECT Sensor Signal | 143°C (289°F) | -40°C (-40°F) | -40°C (-40°F)* |
| Low Reference | - | -40°C (-40°F) | -40°C (-40°F)* |
| * Internal ECM or ECT sensor damage may occur if the circuit is shorted to B+ | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.