Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1775 (SUSPENSION GENERAL DIAGNOSIS)SPECIFICATIONSTRIM HEIGHT SPECIFICATIONS
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Trim Height Specifications
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Trim Height Specifications
WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
| RPO | Service Preferred | Tolerance |
|---|---|---|
| Z Trim Height | ||
|
28 mm (1.1 in) | ± 10 mm (± 0.4 in) |
|
78 mm (3.1 in) | ± 10 mm (± 0.4 in) |
|
39 mm (1.5 in) | ± 10 mm (± 0.4 in) |
|
78 mm (3.1 in) | ± 10 mm (± 0.4 in) |
|
39 mm (1.5 in) | ± 10 mm (± 0.4 in) |
|
78 mm (3.1 in) | ± 10 mm (± 0.4 in) |
|
39 mm (1.5 in) | ± 10 mm (± 0.4 in) |
| D Trim Height | ||
|
62 mm (2.4 in) | ± 10 mm (± 0.4 in) |
|
62 mm (2.4 in) | ± 10 mm (± 0.4 in) |
|
64 mm (2.5 in) | ± 10 mm (± 0.4 in) |
| P Trim Height | ||
|
720 mm (28.3 in) | ± 10 mm (± 0.4 in) |
|
722 mm (28.4 in) | ± 10 mm (± 0.4 in) |
|
726 mm (28.6 in) | ± 10 mm (± 0.4 in) |
|
729 mm (28.7 in) | ± 10 mm (± 0.4 in) |
| R Trim Height | ||
|
724 mm (28.5 in) | ± 10 mm (± 0.4 in) |
|
728 mm (28.7 in) | ± 10 mm (± 0.4 in) |
|
735 mm (28.9 in) | ± 10 mm (± 0.4 in) |
|
742 mm (29.2 in) | ± 10 mm (± 0.4 in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.