SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1438 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSTURN SIGNAL/MULTIFUNCTION SWITCH X2
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6

Turn Signal/Multifunction Switch X2

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Turn Signal/Multifunction Switch X2
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Turn Signal/Multifunction Switch X2 Connector End View
GM1862242Courtesy of GENERAL MOTORS CORP.
Turn Signal/Multifunction Switch X2

Pin Wire Circuit Function
1-6 - - Not Used
7 0.35 PU 524 Headlamp Dimmer Switch High Beam Signal
8 0.35 BK/WH 351 Ground
9 - - Not Used
10 0.35 BN 1356 Flash To Pass Switch Signal
Connector Part Information 
  • OEM: AIT2PB-10-1BH
  • Service: See Catalog
  • Description: 10-Way F AIT II Series (GY)
Terminal Part Information 
  • Pins: 7, 8, 10
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.