SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1438 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSREMOTE CONTROL DOOR LOCK RECEIVER (RCDLR) C2 (UHA/UHF)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6

Remote Control Door Lock Receiver (RCDLR) C2 (UHA/UHF)

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Remote Control Door Lock Receiver (RCDLR) C2 (UHA/UHF)
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Remote Control Door Lock Receiver (RCDLR) C2 (UHA/UHF) Connector End View
GM646384Courtesy of GENERAL MOTORS CORP.
Remote Control Door Lock Receiver (RCDLR) C2 (UHA/UHF)

Pin Wire Circuit Function
A 0.35 PU/WH 5715 Keyless Entry Active Antenna Supply Voltage
B 0.35 GY 5717 Keyless Entry Active Antenna Data Signal
C 0.35 L-BU 5716 Keyless Entry Active Antenna Clock Signal
D 0.35 PU 218 Keyless Entry/Tire Pressure Antenna Signal
E 0.35 OG/BK 5712 Keyless Entry Antenna Low Reference
F 0.35 OG/BK 5718 Keyless Entry Active Antenna Low Reference
G 0.35 L-GN 5707 Keyless Entry Antenna Signal
H 0.35 L-GN/BK 5711 Keyless Entry Antenna Low Reference
J 0.35 TN 219 Keyless Entry Antenna Low Reference
K 0.35 OG 5708 Keyless Entry Antenna Signal
Connector Part Information 
  • OEM: 15332153
  • Service: 88986440
  • Description: 10-Way F GT 150 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 12191812/19
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.