Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1419 (WIPER SYSTEM & WASHER SYSTEM)REPAIR INSTRUCTIONSHEADLAMP WASHER NOZZLE ASSEMBLY REPLACEMENT
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Headlamp Washer Nozzle Assembly Replacement
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Headlamp Washer Nozzle Assembly Replacement
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement . |
|
| 1 | Headlamp Washer Hose Assembly Tip: Disengage the retention clip on the hose from the headlamp washer nozzle. |
| 2 | Headlamp Washer Nozzle Assembly Clip Tip: Slide the clip from under the headlamp washer nozzle. |
| 3 | Headlamp Washer Nozzle Hole Cover Refer to Headlamp Washer Nozzle Hole Cover Replacement (CE4) . |
| 4 | Headlamp Washer Nozzle Assembly Tip: Remove the nozzle up through the front bumper fascia hole opening. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.