Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Navigation Radio
This component acts as the operator interface for the navigation system, provides the data input from the operator to the navigation system and provides navigation information to the operator via the display screen. The navigation radio is located in the center of the instrument panel behind the faceplate. The navigation radio provides the following:
- A hard disk drive (HDD) capable of at least 9 GB maximum memory capacity for storage of media files.
- Soft keys on the display to allow selection from menus and to operate the navigation system, the audio system and the (export) TV system
- The navigation system map with routing information displayed on the navigation radio screen
- Plan a route and provide turn-by-turn route and map guidance with voice prompts
- Select a destination from various areas and choices, such as:
- Street address
- Intersections
- Previous destinations
- Points of interest
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.