Instrument Panel Flood Lamp Replacement - Right Side

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Instrument Panel Flood Lamp Replacement - Right Side
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Panel Flood Lamp Replacement - Right Side
GM1967199Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the right instrument panel trim plate applique. Refer to Instrument Panel Trim Plate Applique Replacement - Right Side .
  2. Remove the instrument panel compartment assembly. Refer to Instrument Panel Compartment Replacement .
1 Instrument Panel Flood Lamp Assembly

Procedure

  1. Note the routing of the wiring through the instrument panel assembly to ensure proper reinstallation.
  2. Disconnect the electrical connector.
  3. Unsnap the flood lamp assembly from the instrument panel.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.