Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1327 (VEHICLE DIAGNOSTIC INFORMATION)SPECIFICATIONSREAR BODY CONTROL MODULE SCAN TOOL INFORMATION
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Rear Body Control Module Scan Tool Information
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Rear Body Control Module Scan Tool Information
WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Rear Integration Module Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Courtesy Lamp 1, 2 w/dim | The RIM activates the courtesy lamps for 15 seconds when you select ON. The courtesy lamps will turn off through the theater dimming feature if you select OFF before the 15 second period has elapsed. |
| Courtesy Lamp 1, 2 w/o dim | The RIM activates the courtesy lamps for 5 seconds when you select ON. The courtesy lamps will turn off immediately if you select OFF before the 5 second period has elapsed. |
| Inadvertent Power Relay | The RIM deactivates the inadvertent power for 5 seconds when you select OFF. The interior lamps should be inoperative for 5 seconds. |
| Interior Lamp Relay | This output control is used to command the interior lamp relay on and off. |
| Intrusion Sensor | This function allows you to enable the vehicles intrusion sensors. |
| LF Turn/Hazard Lamp | The RIM activates the left front turn/hazard lamps for 5 seconds when you select ON. The left front turn/hazard lamps should illuminate for 5 seconds. |
| LR Turn/Hazard Lamp | The RIM activates the left rear turn/hazard lamps for 5 seconds when you select ON. The left rear turn/hazard lamps should illuminate for 5 seconds. |
| RAP Relay | This output control is used to command the RAP relay on and off. |
| Rear Defog Relay | This output control is used to command the rear defogger relay on and off. |
| Rear Fog Lamp Relay | The RIM activates the rear fog lamp relay for 5 seconds when you select ON. The rear fog lamps should illuminate for 5 seconds. |
| Reverse Lamp Relay | The rear integration module (RIM) activates the reverse lamp relay for 5 seconds when you select ON. The reverse lamps should illuminate for 5 seconds. |
| RF Turn/Hazard Lamp | The RIM activates the right front turn/hazard lamps for 5 seconds when you select ON. The right front turn/hazard lamps should illuminate for 5 seconds. |
| RR Turn/Hazard Lamp | The RIM activates the right rear turn/hazard lamps for 5 seconds when you select ON. The right rear turn/hazard lamps should illuminate for 5 seconds. |
| Secure Vehicle | This function allows you to control the vehicle theft deterrent. |
| Trunk Release Relay | This output control is used to command the trunk release relay. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.