Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1310 (DATA COMMUNICATION SYSTEM)DESCRIPTION AND OPERATIONBODY CONTROL SYSTEM DESCRIPTION AND OPERATIONREAR INTEGRATION MODULE (RIM)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Rear Integration Module (RIM)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Rear Integration Module (RIM)
WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
The various rear integration module (RIM) inputs and outputs are described in the corresponding functional areas as indicated on the RIM electrical schematics. The RIM functions include the following:
- Content theft deterrent-Refer to Content Theft Deterrent (CTD) Description and Operation .
- Interior lighting-Refer to Interior Lighting Systems Description and Operation .
- Exterior lighting-Refer to Exterior Lighting Systems Description and Operation .
- Rear defogger-Refer to Rear Window Defogger Description and Operation .
- Rear park assist chime control-Refer to Object Detection Description and Operation (RPA) or Object Detection Description and Operation (VDAAW) or Object Detection Description and Operation (SOD) .
- Sunroof control-Refer to Sunroof Description and Operation .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.