Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1308 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSFRONT SIDE MARKER LAMP REPLACEMENT

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6

Front Side Marker Lamp Replacement

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Front Side Marker Lamp Replacement

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Side Marker Lamp

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

Preliminary Procedure:
Remove the inner wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .

Front Side Marker Lamp

Procedure

Squeeze the attachment clip with the fingers or suitable flat tipped pliers.
Push the lamp assembly outward from the front bumper fascia in order to remove.
Disconnect the lamp socket from the lamp housing.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.