Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1301 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESDIAGNOSTIC CODE INDEX
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Diagnostic Code Index
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Diagnostic Code Index
WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| DTC B0012 or B0013 | B0012 01: Driver Frontal Deployment Loop Stage 1 Short to Battery B0012 02: Driver Frontal Deployment Loop Stage 1 Short to Ground B0012 04: Driver Frontal Deployment Loop Stage 1 Open Circuit B0012 0D: Driver Frontal Deployment Loop Stage 1 Resistance Above Threshold B0012 0E: Driver Frontal Deployment Loop Stage 1 Resistance Below Threshold B0013 01: Driver Frontal Deployment Loop Stage 2 Short to Battery B0013 02: Driver Frontal Deployment Loop Stage 2 Short to Ground B0013 04: Driver Frontal Deployment Loop Stage 2 Open Circuit B0013 0D: Driver Frontal Deployment Loop Stage 2 Resistance Above Threshold B0013 0E: Driver Frontal Deployment Loop Stage 2 Resistance Below Threshold |
| DTC B0014-B0045 | |
| DTC B0052 or B0053 | B0052: Deployment Commanded B0053: Deployment Commanded with Loop DTCs Present |
| DTC B0081 | B0081 3A: Passenger Presence System Incorrect Component Installed B0081 39: Passenger Presence System Internal Electronic Failure B0081 71: Passenger Presence System Invalid Serial Data Received |
| DTC B0083 or B0084 | B0083 00: Front End Sensor 1 No Additional Information (Left) B0083 39: Front End Sensor 1 Internal Electronic Failure (Left) B0083 0F: Front End Sensor 1 Incorrect Component Installed (Left) B0083 3A: Front End Sensor 1 Invalid Serial Data Received (Left) B0084 00: Front End Sensor 2 No Additional Information (Right) B0084 39: Front End Sensor 2 Internal Electronic Failure (Right) B0084 0F: Front End Sensor 2 Incorrect Component Installed (Right) B0084 3A: Front End Sensor 2 Invalid Serial Data Received (Right) |
| DTC B0085 or B0086 | B0085 00: Left Front Side Impact Sensor No Additional Information B0085 39: Left Front Side Impact Sensor Internal Electronic Failure B0085 0F: Left Front Side Impact Sensor Incorrect Component Installed B0085 3A: Left Front Side Impact Sensor Invalid Serial Data Received B0086 00: Right Front Side Impact Sensor No Additional Information B0086 39: Right Front Side Impact Sensor Internal Electronic Failure B0086 0F: Right Front Side Impact Sensor Incorrect Component Installed B0086 3A: Right Front Side Impact Sensor Invalid Serial Data Received |
| DTC B1001 (SDM) | B1001 00: SDM Option Configuration Error |
| DTC B1019 | B1019 00: System Configuration Error |
| DTC B1370 | B1370 01: Device Ignition 1 Circuit Short to Battery B1370 06: Device Ignition 1 Circuit Short to Ground or Open |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.