Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1250 (POWER STEERING SYSTEM)COMPONENT LOCATORPOWER STEERING GEAR DISASSEMBLED VIEW (ELECTRONIC POWER STEERING )
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Power Steering Gear Disassembled View (Electronic Power Steering )
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Power Steering Gear Disassembled View (Electronic Power Steering )
WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Rack and Pinion Housing |
| 2 | Needle Sleeve |
| 3 | Bearing Pinion Assembly (LHD) |
| 4 | Pinion Assembly Retainer |
| 5 | Steering Pinion Seal |
| 6 | Rack Bearing Assembly |
| 7 | O-Ring Seal |
| 8 | Coil Spring |
| 9 | Adjuster Plug |
| 10 | Rack Bushing |
| 11 | Ring Insert |
| 12 | Inner Tie Rod Assembly |
| 13 | Boot Retaining Clamp |
| 14 | Rack and Pinion Boot |
| 15 | Tie Rod End Clamp |
| 16 | Metrix Hex Nut (M14 X 1.5) |
| 17 | Outer Tie Rod Assembly |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.