Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 117 (AUTOMATIC TRANSMISSION SERVICING (4L80-E))TORQUE SPECIFICATIONS
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Torque Specifications
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Torque Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Auxiliary Oil Cooler Line | 17 (23) | ||
| Filler Tube Bolt | 35 (47) | ||
| Filler Tube Nut | 18 (24) | ||
| Flair Nuts | 33 (45) | ||
| Forward Servo Cover Bolt | 18 (24) | ||
| Heat Shield Retaining Bolts | 13 (18) | ||
| Oil Pan Drain Plug | 13 (18) | ||
| Park Neutral Position Switch Bolt | 18 (24) | ||
| Reverse Servo Cover Bolt | 18 (24) | ||
| Transmission Control Lever Nut | 18 (24) | ||
| Upper Cooler Line-To-Radiator Flair Nut | 33 (45) | ||
| INCH Lbs. (N.m) | |||
| Accumulator-To-Case Bolt | 97 (11) | ||
| Auxiliary Oil Cooler Support Bolts | 89 (10) | ||
| Control Valve Body Bolts | 97 (11) | ||
| Fluid Pressure Switch | 97 (11) | ||
| Manual Detent Spring Bolt | 97 (11) | ||
| Manual Valve Position Switch Bolts | 97 (11) | ||
| Oil Pan Bolt | 97 (11) | ||
| Oil Pass Cover Bolt | 97 (11) | ||
| Pressure Control Solenoid Bolt | 97 (11) | ||
| Spacer Plate Support Retaining Bolt | 97 (11) | ||
| TCC Solenoid Bolt | 97 (11) | ||
| Transmission Fluid Indicator Stop Bolt | 97 (11) | ||
| Valve Body-To-Case Bolt (1) | 97 (11) | ||
| VSS Bolt | 97 (11) | ||
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.