Special Tools

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Special Tools
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Illustration Tool Number/ Description
GM2015Courtesy of GENERAL MOTORS CORP.
J 8092
Driver Handle
GM156502Courtesy of GENERAL MOTORS CORP.
J 21128
Axle Pinion Oil Seal Installer
GM156504Courtesy of GENERAL MOTORS CORP.
J 23690
Bearing Installer
GM982Courtesy of GENERAL MOTORS CORP.
J 2619-01
Slide Hammer
GM70139Courtesy of GENERAL MOTORS CORP.
J 39700
100-Pin Breakout Box
GM394652Courtesy of GENERAL MOTORS CORP.
J 39700-325
Breakout Box Adapter
GM893397Courtesy of GENERAL MOTORS CORP.
J 39700-650
Adapter Cable
GM886783Courtesy of GENERAL MOTORS CORP.
J 45857
Tone Wheel and/or Bearing Remover
GM885527Courtesy of GENERAL MOTORS CORP.
J 45860
Tone Ring Installer
GM1493952Courtesy of GENERAL MOTORS CORP.
J 46079
Tire Pressure Monitor Diagnostic Tool
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.