Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1027 (ANTI-LOCK BRAKE SYSTEM, TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEM)COMPONENT LOCATORANTILOCK BRAKE SYSTEM CONNECTORSELECTRONIC BRAKE CONTROL MODULE (JL4)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Electronic Brake Control Module (JL4)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Electronic Brake Control Module (JL4)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Brake Control Module (JL4) Connector Parts Information
Connector Part Information
|
Terminal Part Information
|
Electronic Brake Control Module (JL4) Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | 3 RD/BK | 442 | Battery Positive Voltage |
| 2 | 0.5 GY | 6044 | 5-Volt Reference |
| 3 | 0.5 TN/BK | 7334 | Power Brake Booster Low Control |
| 4 | 0.5 L-GN | 6043 | Steering Angle Sensor Signal |
| 5 | - | - | Not Used |
| 6 | 0.5 D-GN | 872 | Right Front Wheel Speed Sensor Signal |
| 7 | - | - | Not Available |
| 8 | 0.5 YE | 6046 | Steering Angle Sensor Phase A |
| 9 | 0.5 GY | 6044 | 5-Volt Reference |
| 10 | 0.5 OG | 6030 | Brake Booster Vacuum Sensor Signal |
| 11 | 0.5 D-GN/WH | 817 | Vehicle Speed Signal |
| 12 | 0.5 OG/BK | 6045 | Low Reference |
| 13 | 3 BK | 2150 | Ground |
| 14 | 0.5 YE | 2501 | High Speed GMLAN Serial Data Bus- |
| 15 | 0.5 TN | 2501 | High Speed GMLAN Serial Data Bus- |
| 16 | 0.5 PU/WH | 7333 | Power Brake Booster High Control |
| 17 | - | - | Not Available |
| 18 | 0.5 GY/WH | 7065 | Wheel Speed Sensor Supply Voltage Right Front |
| 19 | 0.5 GY/BK | 7128 | Wheel Speed Sensor Supply Voltage Right Rear |
| 20 | 0.5 TN | 884 | Left Rear Wheel Speed Sensor Signal |
| 21 | 0.5 GY/WH | 7064 | Wheel Speed Sensor Supply Voltage Left Front |
| 22-23 | - | - | Not Available |
| 24 | 0.5 L-GN/BK | 6432 | CAN Bus Low Serial Data |
| 25 | 2 RD | 1640 | Battery Positive Voltage |
| 26 | 0.5 YE/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 27 | 0.5 TN/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 28 | 0.5 YE/BK | 6032 | Low Reference |
| 29 | 0.5 D-BU | 6047 | Steering Angle Sensor Phase B |
| 30 | 0.5 TN | 6048 | Steering Angle Sensor Phase C |
| 31 | 0.5 BN | 882 | Right Rear Wheel Speed Sensor Signal |
| 32 | 0.5 D-GN | 2087 | 5-Volt Reference |
| 33 | 0.5 GY/BK | 7127 | Wheel Speed Sensor Supply Voltage Left Rear |
| 34 | 0.5 L-BU/BK | 830 | Left Front Wheel Speed Sensor Signal |
| 35 | 0.5 L-BU | 5986 | Serial Data Communication Enable |
| 36 | - | - | Not Available |
| 37 | 0.5 TN/WH | 6433 | CAN Bus High Serial Data |
| 38 | 3 BK | 2150 | Ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.