Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1005 (DATA COMMUNICATION SYSTEM)COMPONENT LOCATORDATA COMMUNICATION CONNECTORSBODY CONTROL MODULE (BCM) X3
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Body Control Module (BCM) X3
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Body Control Module (BCM) X3
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM) X3 Connector Parts Information
Connector Part Information
|
Terminal Part Information
|
Body Control Module (BCM) X3 Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | 0.8 BK/WH | 1851 | Ground |
| 2 | 0.8 RD/WH | 2140 | Battery Positive Voltage |
| 3 | 0.5 RD/WH | 3840 | Battery Positive Voltage |
| 4 | - | - | Not Used |
| 5 | 0.8 BK/WH | 1851 | Ground |
| 6 | - | - | Not Used |
| 7 | 0.5 GY | 728 | Security Indicator Control (SPO Alarm) |
| 8 | 0.5 TN/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 9 | 0.5 TN | 2501 | High Speed GMLAN Serial Data Bus- |
| 10 | 0.35 D-GN | 5060 | Low Speed GMLAN Serial Data |
| 11 | 0.35 D-GN | 44 | Instrument Panel Lamp Dimmer Switch Signal |
| 12 | 0.35 OG/WH | 812 | 12-Volt Reference |
| 13 | 0.35 PU | 7062 | Brake Switch Signal |
| 14-15 | - | - | Not Used |
| 16 | 0.5 TN/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 17 | 0.5 TN | 2501 | High Speed GMLAN Serial Data Bus- |
| 18 | 0.35 YE | 6817 | LED Backlight Dimming Control |
| 19 | 0.35 L-BU | 5986 | Serial Data Communication Enable |
| 20 | - | - | Not Used |
| 21 | 0.35 OG | 192 | Front Fog Lamp Switch Signal/Fog Lamps Enable (T96) |
| 22 | 0.35 GN/WH | 7158 | Cruise Control Indicator Dimming Signal |
| 23-24 | - | - | Not Used |
| 25 | 0.35 PU/WH | 6816 | Indicator Dimming Control |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.