SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1001 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTORSVIDEO DISPLAY (U42)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6

Video Display (U42)

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Video Display (U42)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Video Display (U42) Connector End Views
GM1711011Courtesy of GENERAL MOTORS CORP.
Video Display (U42) Connector Parts Information

Connector Part Information 
  • OEM: 15490628
  • Service: See Catalog
  • Description: 10-Way F Kaizen 0.64 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
Video Display (U42) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 0.35 D-GN 6975 DVD Video Signal (+)
2 0.35 WH/BK 5335 DVD Video Signal (-)
3-5 - - Not Used
6 0.5 BK 2550 Ground
7 0.5 RD/WH 3240 Battery Positive Voltage
8 0.35 WH 7066 Entertainment Remote Enable Signal
9 0.35 PK/BK 5844 Video Bright Control
10 0.35 L-GN/BK 5845 Video Mode Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.