Lower Bearing and Steering Column Jacket Replacement (Column Shift Standard): Notes

2008 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 KSECTION Notes
    CAUTION: Refer to SIR Caution .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the shift lever assembly. Refer to Shift Lever ReplacementΒ .
  3. Remove the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement .
  4. Remove the ignition lock cylinder case. Refer to Ignition Lock Cylinder Case Replacement .
  5. Inspect the steering column for accident damage. Refer to Steering Column Accident Damage InspectionΒ .
  6. Fig 1: Turn Signal & Multifunction Switch Assembly & Screws
    GM324887Courtesy of GENERAL MOTORS CORP.
  7. Remove the 2 pan head tapping screws from the turn signal and multifunction switch assembly.
  8. Remove the turn signal and multifunction switch assembly.
  9. Fig 2: View Of Automatic Transmission Shift Lock Control Actuator
    GM324906Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.