Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 6.0 KREPAIR AND DIAGNOSISBRAKESPARKING BRAKE SYSTEMREPAIR INSTRUCTIONSPARK BRAKE CABLE GUIDE REPLACEMENTREMOVAL PROCEDURE

2008 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 K

Removal Procedure

2008 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 KSECTION Removal Procedure

Release the parking brake.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

Fig 1: View Of Park Brake Cable Guide Bolt (Cutaway Vehicle)

Courtesy of GENERAL MOTORS CORP.

For cutaway vehicles, remove the park brake cable guide bolt from the frame.

Fig 2: View Of Park Brake Cable Guide Bolt (Cargo & Passenger Vehicles)

Courtesy of GENERAL MOTORS CORP.

For cargo and passenger vehicles, remove the park brake cable guide bolt from the frame.
Remove the park brake cable guide.
Remove the park brake guide from the park brake cable.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.