Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 6.0 KREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINSTRUMENT PANEL TRIM AND CONSOLE TRIMREPAIR INSTRUCTIONSDRIVER KNEE BOLSTER BRACKET REPLACEMENT
2008 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 K
Driver Knee Bolster Bracket Replacement
2008 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 KSECTION Driver Knee Bolster Bracket Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the driver side knee bolster. Refer to Driver Knee Bolster Replacement . |
|
| 1 | Driver Knee Bolster Bracket Nut (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 10 N.m (89 lb in) |
| 2 | Driver Knee Bolster Bracket Assembly Tip: Remove the knee bolster deflector and the knee bolster brackets as an assembly. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.