Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2008AVEO LT, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIM AND PANELINGREPAIR INSTRUCTIONSCENTER PILLAR LOWER TRIM PANEL REPLACEMENT (NOTCHBACK)REMOVAL PROCEDURE

2008 Chevrolet Aveo LT, Automatic

Removal Procedure

2008 Chevrolet Aveo LT, AutomaticSECTION Removal Procedure

Fig 1: Center Pillar Lower Trim Panel

Courtesy of GENERAL MOTORS CORP.

Reposition the rear portion of the front rocker trim panel and the front portion of the rear rocker trim panel.
Pry off the lower center pillar trim panel.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.