Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 992 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSFRONT SIDE MARKER LAMP BULB REPLACEMENT (GMC)
2006 Chevrolet Suburban K2500, 6.0 U
Front Side Marker Lamp Bulb Replacement (GMC)
2006 Chevrolet Suburban K2500, 6.0 USECTION Front Side Marker Lamp Bulb Replacement (GMC)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Front Side Marker Lamp Bulb Replacement (GMC)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove either the LF or RF headlamp assembly. Refer to Headlamp Replacement (Chevrolet) or Headlamp Replacement (GMC HD) . |
|
| 1 | Lamp Harness Socket Tip: Rotate the marker lamp socket a quarter turn counterclockwise and remove the lamp socket from the headlamp assembly. |
| 2 | Front Side Marker Lamp Bulb Tip: Pull the front side marker lamp bulb straight from the lamp socket. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.