SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 956 (SECONDARY AND CONFIGURABLE CUSTOMER CONTROLS)VISUAL IDENTIFICATIONSECONDARY/CONFIGURABLE CONNECTORSSTEERING WHEEL CONTROL SWITCH ASSEMBLY - LEFT (K34/KA9)
2006 Chevrolet Suburban K2500, 6.0 U

Steering Wheel Control Switch Assembly - Left (K34/KA9)

2006 Chevrolet Suburban K2500, 6.0 USECTION Steering Wheel Control Switch Assembly - Left (K34/KA9)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Steering Wheel Control Switch Assembly - Left (K34/KA9) Connector End View
GM1711015Courtesy of GENERAL MOTORS CORP.
Steering Wheel Control Switch Assembly - Left (K34/KA9) Connector Parts Information

Connector Part Information 
  • OEM: 15405522
  • Service: See Catalog
  • Description: 10-Way F Receptacle 0.64 Series (GY)
  • Terminal/Tray: 1393364-2/7
  • Core/Insulation Crimp: K/K
  • Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
Steering Wheel Control Switch Assembly - Left (K34/KA9) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 PK/BK 1444 12-Volt Reference
2 - - Not Used
3 GY 1884 Cruise Control Switch Signal
4-5 - - Not Used
6 BN 6136 Supply Voltage
7 - - Not Used
8 BK 1050 Ground
9 D-GN/WH 7158 Cruise Control Indicator Dimming Control
10 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.