Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 941 (POWER STEERING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Suburban K2500, 6.0 U
Fastener Tightening Specifications
2006 Chevrolet Suburban K2500, 6.0 USECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Booster Inlet Line Hose Fitting | 32 N.m | 24 lb ft |
| Engine Protection Shield Bolts | 20 N.m | 15 lb ft |
| Inner Tie Rod End to Steering Gear | 100 N.m | 74 lb ft |
| Intermediate Shaft Coupling Pinch Bolt | 47 N.m | 35 lb ft |
| Lash Adjuster Lock Gear | 49 N.m | 36 lb ft |
| Lash Adjuster Lock Nut | 49 N.m | 36 lb ft |
| Pitman Arm to Gear Nut | 250 N.m | 184 lb ft |
| Pitman Arm to Relay Rod Nut | 62 N.m | 46 lb ft |
| Power Steering Cooler Mounting Bolts | 9 N.m | 80 lb in |
| Power Steering Flow Control Valve Fitting | 75 N.m | 55 lb ft |
| Power Steering Gear End Housing Cover Bolts | 62 N.m | 46 lb ft |
| Power Steering Gear Housing Cover Bolts (Pitman Shaft) | 62 N.m | 46 lb ft |
| Power Steering Gear Inlet Hose Fitting | 32 N.m | 24 lb ft |
| Power Steering Gear Outlet Pipe | 32 N.m | 24 lb ft |
| Power Steering Gear to Frame Bolts (Non Rack and Pinion) | 150 N.m | 110 lb ft |
| Power Steering Hose Assembly Bolt at Gear (Rack and Pinion) | 12 N.m | 106 lb in |
| Power Steering Pump Front Bracket Bolts (LMM) | 50 N.m | 37 lb ft |
| Power Steering Pump Front Mounting Bolts | 50 N.m | 37 lb ft |
| Power Steering Pump Bracket Bolts (LU3) | 41 N.m | 30 lb ft |
| Power Steering Pump Bracket Nut (LU3) | 41 N.m | 30 lb ft |
| Power Steering Pump Bracket Stud (LU3) | 50 N.m | 37 lb ft |
| Power Steering Pump Mounting Studs to Pump Housing | 58 N.m | 44 lb ft |
| Power Steering Pump Rear Bracket Nuts | 50 N.m | 37 lb ft |
| Power Steering Pump Rear Bracket Nuts (LU3) | 41 N.m | 30 lb ft |
| Power Steering Pump Rear Mounting Bolts | 50 N.m | 37 lb ft |
| Power Steering Pump Rear Mounting Bolts (LMM) | 50 N.m | 37 lb ft |
| Rack and Pinion Gear Adjuster Lock Nut | 68 N.m | 50 lb ft |
| Rack and Pinion Gear Cylinder Line Fitting | 19 N.m | 14 lb ft |
| Rack and Pinion Gear Cylinder Line Retaining Plate Screw | 12 N.m | 106 lb in |
| Rack and Pinion Gear Inner Tie Rod End Jam Nut | 75 N.m | 55 lb ft |
| Rack and Pinion Gear Inner Tie Rod End to Steering Gear | 100 N.m | 74 lb ft |
| Rack and Pinion Gear Outer Tie Rod End Nut | 60 N.m | 44 lb ft |
| Rack and Pinion Gear to Frame Bolts-Left Side | 200 N.m | 148 lb ft |
| Rack and Pinion Gear to Frame Bolts-Right Side | 100 N.m | 74 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.