Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 941 (POWER STEERING SYSTEM)COMPONENT LOCATORPOWER STEERING GEAR DISASSEMBLED VIEW
2006 Chevrolet Suburban K2500, 6.0 U
Power Steering Gear Disassembled View
2006 Chevrolet Suburban K2500, 6.0 USECTION Power Steering Gear Disassembled View
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Outer Tie Rod |
| 2 | Hexagon Jam Nut |
| 3 | Tie Rod End Clamp |
| 4 | Rack and Pinion Boot |
| 5 | Boot Clamp |
| 6 | Inner Tie Rod |
| 7 | Cylinder Line - LT |
| 8 | Cylinder Line - RH |
| 9 | O-Ring Seal |
| 10 | O-Ring Seal |
| 11 | Cylinder Line Retaining Plate |
| 12 | External TORX® Screw |
| 13 | Rack and Pinion Gear Assembly |
| 14 | Inner Tie Rod |
| 15 | Boot Clamp |
| 16 | Rack and Pinion Boot |
| 17 | Tie Rod End Clamp |
| 18 | Hexagon Jam Nut |
| 19 | Outer Tie Rod |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.