Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 920 (FRONT DRIVE AXLE)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Suburban K2500, 6.0 U
Fastener Tightening Specifications
2006 Chevrolet Suburban K2500, 6.0 USECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Differential Adjuster Lock Nut Bolt | 20 N.m | 15 lb ft |
| Differential Carrier Assembly Case Bolts 8.25 Axle | 73 N.m | 54 lb ft |
| Differential Carrier Assembly Case Bolts 9.25 Axle | 47 N.m | 35 lb ft |
| Differential Carrier Assembly Mounting Bolts and Nuts | 100 N.m | 75 lb ft |
| Differential Carrier Bracket to Frame Nuts | 90 N.m | 67 lb ft |
| Front Differential Carrier Shield Bolts | 20 N.m | 15 lb ft |
| Front Drive Axle Actuator | 20 N.m | 15 lb ft |
| Inner Shaft Housing to Bracket Nuts | 100 N.m | 75 lb ft |
| Inner Shaft Housing to Differential Carrier Assembly Bolts 8.25 Axle | 55 N.m | 41 lb ft |
| Inner Shaft Housing to Differential Carrier Assembly Bolts 9.25 Axle | 40 N.m | 30 lb ft |
| Pinion Shaft Lock Bolt, 9.25 Axle | 53 N.m | 39 lb ft |
| Plug, Drain and Fill | 33 N.m | 24 lb ft |
| Ring Gear Bolts, 8.25 Axle | 120 N.m | 89 lb ft |
| Ring Gear Bolts, 9.25 Axle | 138 N.m | 102 lb ft |
| Stabilizer Link Nut | 18 N.m | 13 lb ft |
| Vent Hose Connector | 28 N.m | 21 lb ft |
| Wheel Drive Shaft Inboard Flange Bolts | 79 N.m | 58 lb ft |
| Wheel Drive Shaft to Front Hub Nut | 240 N.m | 177 lb ft |
| Yoke Retainer Bolts | 25 N.m | 18 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.