Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
LDCM Scan Tool Data Definitions
The LDCM Scan Tool Data Definitions contains a brief description of all memory seat related LDCM parameters available on the scan tool.
- Door Ajar
-
The scan tool displays Closed or Ajar. When the driver door is open the scan tool will display Ajar. When the driver door is closed the scan tool will display closed.
- Memory 1 Select Switch
-
The scan tool displays Active or Inactive. When the memory 1 switch is pressed the scan tool will display Active. When the switch is released the scan tool will display Inactive.
- Memory 2 Select Switch
-
The scan tool displays Active or Inactive. When the memory 2 switch is pressed the scan tool will display Active. When the switch is released the scan tool will display Inactive.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.