Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 309 (PERSONALIZATION SYSTEM)DESCRIPTION AND OPERATIONDRIVER PERSONALIZATIONPROGRAMMING FEATURES WITH THE DRIVER INFORMATION CENTERAUTOMATIC LOCKING/AUTOMATIC UNLOCKING
2006 Chevrolet Suburban K2500, 6.0 U
Automatic Locking/Automatic Unlocking
2006 Chevrolet Suburban K2500, 6.0 USECTION Automatic Locking/Automatic Unlocking
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Continue with the following steps in order to program the automatic door locks feature:
- The DIC displays LOCK DOORS: OUT OF PARK, MANUALLY or WITH SPEED.
- Press the select button in order to scroll through the above choices.
- Press the personalization button in order to select the displayed choice and to advance to the next option.
- The DIC displays UNLOCK: ALL IN PARK, ALL AT KEY OUT, DOORS MANUALLY or DRIVER IN PARK.
- Press the select button in order to scroll through the above choices.
- Press the personalization button in order to advance to the next option.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.