SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2143 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC COMPASS MODULE TO MEMORY SEAT MODULE (X4))COMPONENT CONNECTOR END VIEWSINFRARED TRANSMITTER (U42)
2006 Chevrolet Suburban K2500, 6.0 U

Infrared Transmitter (U42)

2006 Chevrolet Suburban K2500, 6.0 USECTION Infrared Transmitter (U42)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM1962089Courtesy of
Connector Part Information
  • Harness Type: Headliner
  • OEM Connector: 15486794
  • Service Connector: 19178169
  • Description: 16-Way F Micro HVT Series (BN)
Terminal Part Information
  • Terminated Lead: 13575550
  • Release Tool: J-38125-559
  • Diagnostic Test Probe: J-35616-16 (L-GN)
  • Terminal/Tray: 15445905/23
  • Core/Insulation Crimp: J/J
Infrared Transmitter (U42)

Pin Wire Circuit Function
1 0.35 L-BU 5826 Left DVD Audio Signal (+)
2 0.35 PU 6979 DVD Audio Common
3 0.35 WH 5828 Right DVD Audio Signal (+)
4 0.35 PK 5829 Infrared Module Control
5-7 - - Not Used
8 0.35 OG/BK 5831 Remote Infrared Signal (+)
9 0.35 OG/BK 5329 Left Infrared Audio Signal
10 0.35 BN/WH 5331 Low Reference
11 0.35 PU/WH 5330 Right Infrared Audio Signal
12 0.35 BK 2550 Ground
13-15 - - Not Used
16 0.35 TN/WH 5830 Remote Infrared Signal (-)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.