Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2087 (VEHICLE DIAGNOSTIC INFORMATION - SPECIFICATIONS - SCAN TOOL DATA (2 OF 2))SPECIFICATIONSREAR SEAT HEATER CONTROL MODULE SCAN TOOL INFORMATION
2006 Chevrolet Suburban K2500, 6.0 U
Rear Seat Heater Control Module Scan Tool Information
2006 Chevrolet Suburban K2500, 6.0 USECTION Rear Seat Heater Control Module Scan Tool Information
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Rear Heated Seat Module
| Scan Tool Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON/Engine OFF | |||
| Left Rear Seat HVC Mode | - | Off | The scan tool displays Off, Back & Cushion, Back Only and Cool. This is the state of the left rear seat HVAC mode. |
| Left Rear Seat HVC Level | - | High | The scan tool displays High, Medium and Low. This is the state of the left rear HVAC level when commanded on. |
| Left Rear Seat Back Heat Status | - | Inactive | The scan tool displays Active/Inactive. This is the state of the left rear seat back heat. |
| Left Rear Seat Cushion Heat Status | - | Inactive | The scan tool displays Active/Inactive. This is the state of the left rear seat cushion heat. |
| Seat Heat Supply Voltage | - | Inactive | The scan tool displays Active/Inactive. This is the state of the seat's heat supply voltage. |
| Right Rear Seat HVC Mode | - | Off | The scan tool displays Off, Back & Cushion, Back Only and Cool. This is the state of the right rear seat HVAC mode. |
| Right Rear Seat HVC Level | - | High | The scan tool displays High, Medium and Low. This is the state of the right rear HVAC level when commanded on. |
| Right Rear Seat Back Heat Status | - | Inactive | The scan tool displays Active/Inactive. This is the state of the right rear seat back heat. |
| Right Rear Seat Cushion Heat Status | - | Inactive | The scan tool displays Active/Inactive. This is the state of the right rear seat cushion heat. |
| Seat Heat Supply Voltage | - | Inactive | The scan tool displays Active/Inactive. This is the state of the seat's heat supply voltage. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.