SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1909 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - MODE ACTUATOR THROUGH YAW SENSOR)COMPONENT CONNECTOR END VIEWSSUNROOF CONTROL MODULE (CF5)
2006 Chevrolet Suburban K2500, 6.0 U

Sunroof Control Module (CF5)

2006 Chevrolet Suburban K2500, 6.0 USECTION Sunroof Control Module (CF5)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Sunroof Control Module (CF5) Connector End View
GM1467121Courtesy of GENERAL MOTORS CORP.
Sunroof Control Module (CF5)

Pin Wire Circuit Function
1 2 RD/WH 3140 Battery Positive Voltage
2 2 BK 1050 Ground
3 0.35 D-GN 2074 Sunroof Switch Express Signal
4 - - Not Used
5 0.35 YE 43 Ignition Voltage
6 0.35 WH 5429 Ignition Voltage
7 0.35 BN 100 Sunroof Switch Open Signal
8 0.35 PK 2075 Sunroof Switch Close Vent Signal
9 0.35 L-BU 110 Sunroof Switch Close Switch Signal
10 0.35 OG/BK 144 Sunroof Switch Open Vent Signal
Connector Part Information
  • Harness Type: Sunroof
  • OEM Connector: KET MG 651056
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 10-Way F 090-II Series (WH)
Terminal Part Information
  • Terminal/Tray: Service by Harness - See Part Catalog
  • Core/Insulation Crimp: Not Available
  • Release Tool/Test Probe: Not Available
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.