SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1560 (BATTERY, CHARGING SYSTEM AND STARTING SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESDTC C0900TYPICAL SCAN TOOL DATA
2006 Chevrolet Suburban K2500, 6.0 U

Typical Scan Tool Data

2006 Chevrolet Suburban K2500, 6.0 USECTION Typical Scan Tool Data
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Battery Voltage Signal - EBCM

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON, Engine OFF.
Parameter Normal Value:  12.60 Volts.
B+ 0.00 Volts* 0.00 Volts* -
*The scan tool will not communicate with the EBCM if the battery voltage is less than 7 V.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.