Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Operating Functions
The battery energy control module (BECM) is also referred to as the drive motor generator battery control module. In order to maintain proper state of charge levels and operate efficiently, the hybrid drive motor generator battery has several systems that need to be monitored and controlled. These systems include hybrid battery voltage measurement, hybrid battery current measurement, hybrid battery cooling and the high voltage interlock loop system. Additionally, the BECM operates the high voltage contactor relays at the request of the hybrid powertrain control module (HPCM). The BECM is located within the hybrid battery assembly.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.