Fastener Tightening Specifications

2006 Chevrolet Suburban K2500, 6.0 USECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Inflatable Restraint Front Passenger Position Sensor Screws 3 N.m 25 lb in
Inflatable Restraint Rollover Sensor Nuts 10 N.m 89 lb in
Inflatable Restraint Roof Rail Bolts 9 N.m 80 lb in
Inflatable Restraint SDM Nuts 7 N.m 56 lb in
Inflatable Restraint Side Impact Sensor Module Bolts 9 N.m 80 lb in
Instrument Panel Inflatable Restraint Module Bolts 10 N.m 89 lb in
SIR Front End Discriminating Sensor Bolts 8 N.m 71 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.