Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 133 (ENGINE CONTROLS SELF-DIAGNOSTICS - 4.3L)DIAGNOSTIC TESTSDTC P0125: EXCESSIVE TIME TO ENTER CLOSED LOOP FUEL CONTROLCONDITIONS FOR RUNNING DTC
2006 Chevrolet Suburban K2500, 6.0 U
Conditions For Running DTC
2006 Chevrolet Suburban K2500, 6.0 USECTION Conditions For Running DTC
WARNING: This page is about a different car, the 2003 GMC Savana and 2003 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
- DTCs P0100, P0102, P0103, P0112, P0113, P0116, P0117, P0118, P0500, P0502 or P503 are not set.
- The Intake Air Temperature (IAT) is between 19-131° F (-7-+55° C).
- The start-up coolant temperature is between -33-+83° F (-36-+28.5° C).
- The mass air flow is between 24-75 g/s with the average 12 g/s.
- The vehicle speed is more than 5 mph (8 km/h) for more than 0.5 miles (0.80 km).
- The engine is running between 120-3200 seconds.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.