Fastener Tightening Specifications

2006 Chevrolet Suburban K2500, 6.0 USECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Air Inlet Grille Panel Screws 1.6 N.m 14 lb in
Plenum Reinforcement Panel Bolts 9 N.m 80 lb in
Rear Window Wiper Arm Nut 9 N.m 80 lb in
Rear Window Wiper Arm Park Ramp Bolt 9 N.m 80 lb in
Rear Window Wiper Motor Assembly Bolts 4.0 N.m 35 lb in
Rear Window Wiper Motor Shaft Nut 4.9 N.m 43 lb in
Windshield Washer Solvent Container Bolts 9 N.m 80 lb in
Windshield Washer Solvent Heater Assembly Bolts 9 N.m 80 lb in
Windshield Wiper Arm Pivot Shaft Nuts 33 N.m 24 lb ft
Windshield Wiper System Module Bolts to Plenum 9 N.m 80 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.