SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1257 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSREMOTE CONTROL DOOR LOCK RECEIVER (RCDLR) C1 (UHA/UHF)
2006 Chevrolet Suburban K2500, 6.0 U

Remote Control Door Lock Receiver (RCDLR) C1 (UHA/UHF)

2006 Chevrolet Suburban K2500, 6.0 USECTION Remote Control Door Lock Receiver (RCDLR) C1 (UHA/UHF)
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Remote Control Door Lock Receiver (RCDLR) C1 (UHA/UHF) Connector End View
GM800518Courtesy of GENERAL MOTORS CORP.
Remote Control Door Lock Receiver (RCDLR) C1 (UHA/UHF)

Pin Wire Circuit Function
A-B - - Not Used
C 0.35 PU/WH 5905 Key Capture/Column Lock Shift Position Signal
D-F - - Not Used
G 0.35 L-GN 80 Key In Ignition Switch Signal
H 0.35 OG 3440 Battery Positive Voltage
J-K - - Not Used
L 0.35 D-GN 5060 Low Speed GMLAN Serial Data
M - - Not Used
N 0.35 PK 5879 Right Front Door Handle Switch Signal
P 0.35 L-BU 383 Trunk Release Control
R 0.35 D-BU 5882 Left Front Door Handle Switch Signal
S 0.35 BK 1051 Ground
Connector Part Information 
  • OEM: 15332177
  • Service: See Catalog
  • Description: 16-Way F GT 150 Series (BK)
Terminal Part Information 
  • Pins: C, G, H, L, N, P, R, S
  • Terminal/Tray: 12191812/19
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.