SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1257 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSMEMORY SEAT MODULE (MSM) (A45) X1
2006 Chevrolet Suburban K2500, 6.0 U

Memory Seat Module (MSM) (A45) X1

2006 Chevrolet Suburban K2500, 6.0 USECTION Memory Seat Module (MSM) (A45) X1
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Memory Seat Module (MSM) (A45) X1 Connector End View
GM1566781Courtesy of GENERAL MOTORS CORP.
Memory Seat Module (MSM) (A45) X1

Pin Wire Circuit Function
1-5 - - Not Used
6 0.8 RD/WH 2077 Driver Seat Cushion Heated/Cool Ventilation Module Heat Control
7 1 BK 2110 Steering Column Telescope Motor Control - Reverse
8 1 RD 2098 Steering Column Telescope Motor Forward
9 1 TN 285 Driver Seat Horizontal Motor Forward Control
10 1 L-GN 284 Driver Seat Horizontal Motor Rearward Control
11 0.8 L-GN 2078 Driver Seat Cushion Heated/Cool Ventilation Module Cool Control
12 1 D-GN 286 Driver Seat Front Vertical Motor Up Control
13 1 D-BU 287 Driver Seat Front Vertical Motor Down Control
14 0.8 D-BU 2479 Passenger Seat Cushion Heated/Cool Ventilation Module Heat Control
15 1 YE 282 Driver Seat Rear Vertical Motor Up Control
16 1 L-BU 283 Driver Seat Rear Vertical Motor Down Control
Connector Part Information 
  • OEM: 15134091
  • Service: See Catalog
  • Description: 16-Way F (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.