SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1257 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSDRIVER DOOR MODULE (DDM) X5
2006 Chevrolet Suburban K2500, 6.0 U

Driver Door Module (DDM) X5

2006 Chevrolet Suburban K2500, 6.0 USECTION Driver Door Module (DDM) X5
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driver Door Module (DDM) X5 Connector End View
GM1664581Courtesy of GENERAL MOTORS CORP.
Driver Door Module (DDM) X5

Pin Wire Circuit Function
1 0.5 PK 6190 Lift Glass/Trunk Exterior Release Signal
2 - - Not Used
3 0.5 BK/WH 51 Ground
4-6 - - Not Used
7 0.5 YE 1491 Backlight Lamps Control
8-10 - - Not Used
Connector Part Information 
  • OEM: 15127041
  • Service: See Catalog
  • Description: 10-Way F (BK)
Terminal Part Information 
  • Pins: 1, 3, 7
  • Terminal/Tray: 7116-4618-02
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.