SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1257 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) X4
2006 Chevrolet Suburban K2500, 6.0 U

Body Control Module (BCM) X4

2006 Chevrolet Suburban K2500, 6.0 USECTION Body Control Module (BCM) X4
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) X4 Connector End View
GM1664499Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) X4

Pin Wire Circuit Function
1 0.8 OG 1540 Battery Positive Voltage
2 0.8 OG 1340 Battery Positive Voltage
3 1 OG 1640 Battery Positive Voltage
4 0.8 OG 1440 Battery Positive Voltage
5 0.8 D-BU/WH 1315 Right Front Turn Signal Lamp Supply Voltage/Right Turn Signal Indicator Lamp Supply Voltage
6 0.35 D-GN 6134 Local Interconnect Network 3
7 0.35 YE 196 Windshield Wiper Motor Park Switch Signal
8 - - Not Used
9 0.35 BK/WH 451 Ground
10 0.35 OG 140 Battery Positive Voltage
11 0.35 D-GN/WH 1317 Fog Lamp Relay Control/Front Fog Lamp Relay and Indicator Control (T96)
12-13 - - Not Used
14 0.35 L-GN 482 Outside Moisture Sensor Signal 2 (CE1)
15 0.35 OG 2268 Windshield Washer Relay Control
16 0.35 BK/WH 1969 Headlamp Relay Control/Headlamp High Beam Relay Control
17 0.35 PU 5531 Hood Closed Switch Signal
18 0.35 BK 481 Outside Moisture Sensor Signal 1 (CE1)
19 0.35 D-BU 5985 Accessory Wakeup Serial Data
20 0.35 YE 1977 Rear Fog Lamp Relay Control/Rear Fog Lamp Relay and Indicator Control (T79)
21 0.35 PK 139 Ignition 1 Voltage
22 - - Not Used
23 0.35 D-BU 545 DRL Supply Voltage (TT6/TT7/TT8)
24 - - Not Used
25 0.35 WH 1080 Park Lamp Relay Control (T90)
Connector Part Information 
  • OEM: 15482792
  • Service: 88988841
  • Description: 25-Way F HIT Series (BK)
Terminal Part Information 
  • Pins: 6, 7, 9-11, 14-21, 23, 25
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
  • Pins: 1-5
  • Terminal/Tray: SNAC-A061T-M2.8/20
  • Core/Insulation Crimp: Pins 1, 2, 4, 5 - E/A
  • Core/Insulation Crimp: Pins 3 - C/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.