Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1255 (HYDRAULIC BRAKE SYSTEM)SPECIFICATIONSBRAKE COMPONENT SPECIFICATIONS
2006 Chevrolet Suburban K2500, 6.0 U
Brake Component Specifications
2006 Chevrolet Suburban K2500, 6.0 USECTION Brake Component Specifications
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Caliper Bleeder Valve | 10 N.m | 89 lb in |
| Brake Caliper Bore Diameter - Front (JE5) | 45.05 mm | 1.77 in |
| Brake Caliper Bore Diameter - Front (J55) | 42 mm | 1.65 in |
| Brake Caliper Bore Diameter - Rear (JE5) | 47 mm | 1.85 in |
| Brake Caliper Bore Diameter - Rear (J55) | 45.05 mm | 1.77 in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.