SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1220 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSHIGH INTENSITY DISCHARGE HEADLAMP BALLAST REPLACEMENT (BASE)
2006 Chevrolet Suburban K2500, 6.0 U

High Intensity Discharge Headlamp Ballast Replacement (Base)

2006 Chevrolet Suburban K2500, 6.0 USECTION High Intensity Discharge Headlamp Ballast Replacement (Base)
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: High Intensity Discharge Headlamp Ballast Replacement (Base)
GM1963019Courtesy of GENERAL MOTORS CORP.
Callout Component Name
CAUTION: The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.