SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1000 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTORSRADIO X2 (-Y91)
2006 Chevrolet Suburban K2500, 6.0 U

Radio X2 (-Y91)

2006 Chevrolet Suburban K2500, 6.0 USECTION Radio X2 (-Y91)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radio X2 (-Y91) Connector End Views
GM850856Courtesy of GENERAL MOTORS CORP.
Radio X2 (-Y91) Connector Parts Information

Connector Part Information 
  • OEM: 13527976
  • Service: See Catalog
  • Description: 16-Way F Micro 64 Unsealed (PU)
Terminal Part Information 
  • Pins: 1-3, 5-11, 13-15
  • Terminal/Tray: 15359541/4
  • Core/Insulation Crimp: M/M
  • Release Tool/Test Probe: 15381651-2/J-35616-64B (L-BU)
Radio X2 (-Y91) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 0.35 BN/WH 367 Left Audio Signal (+) (U2K)
2 0.35 D-GN/WH 368 Right Audio Signal (+) (U2K)
3 0.5 BARE 2099 Drain Wire (UQA)
4 - - Not Used
5 0.5 BN 199 Left Rear Speaker Output (+) (UQ3/UQ5)
0.35 BN/WH 599 Left Rear Low Level Audio Signal (+) (UQA)
6 0.35 D-BU 546 Right Rear Low Level Audio Signal (+) (UQA)
0.5 D-BU 46 Right Rear Speaker Output (+) (UQ3/UQ5)
7 0.35 D-BU 658 Cellular Telephone Voice Signal (UE1)
8 0.35 OG 6978 Amplifier Control (UQA)
9 0.35 TN/WH 372 Left Radio Audio Output (-) (U2K)
10 0.35 GY 388 Remote Radio Right Audio Signal (U2K)
11 0.35 BARE 1573 Drain Wire (U2K)
12 - - Not Used
13 0.35 YE 116 Left Rear Low Level Audio Signal (-) (UQ3/UQ5)
0.35 BN 1999 Left Rear Low Level Audio Signal (-) (UQA)
14 0.5 L-BU 115 Right Rear Low Level Audio Signal (-) (UQ3/UQ5)
0.35 TN 1946 Right Rear Low Level Audio Signal (-) (UQA)
15 0.35 L-BU/BK 659 Low Reference (UE1)
16 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.