Electronic Brake Control Module (EBCM) - C2 (w/o JL4)

2006 Chevrolet Suburban K2500, 6.0 USECTION Electronic Brake Control Module (EBCM) - C2 (w/o JL4)
Electronic Brake Control Module (EBCM) - C2 (w/o JL4)

GM365992Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12193519
  • 16-Way F Micro-Pack 100W (NA)
Pin Wire Color Circuit No. Function
A1 BN 441 Ignition 3 Voltage
A2 YE 873 Left Front Wheel Speed Sensor Low Reference
A3 D-GN 872 Right Front Wheel Speed Sensor Signal
A4 TN/BK 464 Delivered Torque Signal
A5-A7 - - Not Used
A8 BK/WH 1695 Traction Control Switch Signal
B1 YE/BK 1827 Vehicle Speed Signal
B2 L-BU 830 Left Front Wheel Speed Sensor Signal
B3 TN 833 Right Front Wheel Speed Sensor Low Reference
B4 OG/BK 463 Requested Torque Signal
B5 PU 420 TCC Brake Switch/Cruise Control Release Signal
B6 L-BU 1122 ABS/TCS Class 2 Serial Data
B7 - - Not Used
B8 PU 333 Brake Pressure Sensor Signal (1500 Series)
PU 333 Brake Fluid Level Sensor Signal (2500 Series)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.