Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSDOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEMREPAIR INSTRUCTIONSSWITCH REPLACEMENT - DOOR LOCK AND SIDE WINDOW - PASSENGERREMOVAL PROCEDURE

2006 Chevrolet Suburban K2500, 6.0 U

Removal Procedure

2006 Chevrolet Suburban K2500, 6.0 USECTION Removal Procedure

Fig 1: Removing Switch Panel Bezel Screw

Courtesy of GENERAL MOTORS CORP.

Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .
Remove the screw (2) that retains the switch panel bezel (1) to the front door trim panel.

Fig 2: Removing Switch Panel Bezel

Courtesy of GENERAL MOTORS CORP.

Remove the switch panel bezel from the door panel using a flat-bladed tool.

Fig 3: Removing Door Module

Courtesy of GENERAL MOTORS CORP.

Using a wide plastic flat-bladed tool, release the retaining clips on both sides of the door module.
Remove the door module from the switch panel bezel.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.